<body class="content">
<span class="h1">PizzaPower<sup>®</sup> – POWER DISTRIBUTION UNITS</span><br>
<br>
A new generation of the power distribution units of
the DI-STRIP® range now ensures even more power:
PizzaPower® for fail-safe power supply distribution
in network racks.
Increasingly greater packing densities and therefore constantly increasing energy requirements in server
racks caused by blade servers or 1 U rack servers
will now be handled electro technically:
Up to 35 kW dissipated heat can be removed from
modern CoolTherm® server racks. But how is the necessary power supplied into the rack, which
can cause such power losses?
The PizzaPower® (3x32 A) optimally distributes the
required power over the entire rack, with connection
of up to 15 consumers possible in the highest configuration level. 192 A can be supplied to the rack
with redundant feed via the PizzaPower®.
<br>
<br>
Cost-Effective
Simple and quick installation on the server rack’s
extrusion. Cost reduction in installation and wiring.
Supply
- Single-phase 32 A and three-phase 32 A.
- =22 kVA
- Ideal for implementing redundancy (e.g. 192 A).
Crystal Clear Assignment
Unmistakeable phase assignment
through colour-coding (L1, L2, L3).
Installation
Optimum distribution of Blade
Centre supply with simple installation
of power distribution unit (PDU).
Availability
Prevention of „Single Point of
Failure“ with individual fusing.<br><br>
DI-STRIP® PizzaPower®
Technical data
- IEC 320 sockets (10 A and 16 A).
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC600934.
- Cable: H05VV-F 5G 4 mm².
- Cable: 4 m.
- With IEC60309 plug.
Material / Finish
Casing: Sheet steel, zinc passivated,
powder-coated
Dimensions
Height: Approx. 60 mm.
Casing width: 84 mm
Colour
Casing: RAL 9005, black
Approvals
CE label in accordance with low
potential guideline 73/23/EWG, EMC
guideline 89/336/EWG, GS Certificate,
CSA Certificate.
Load Rating
240/415 V, 1x 32 A, 3x 32 A,
Euro module 10/16 A
Supply Schedule
1 socket strip (PDU)
2 mounting brackets
1 19“ mounting bracket
1 operating instructions
</body>